J K Enterprise Investments Ltd

Selection of CNC Machinery and Assets Surplus to Requirements

Ended: 11th May 2011 14:00
  •  site
    LOT 1
    Daewoo (2001) Puma 600 CNC - 2 Axis Turning Centre / CNC Lathe. With Fanuc 18i-T Control.
    Max Swing Over Bed 1030mm. Max Turning Dia 900mm. Max Turning Length 1600mm. Traverses X = 470mm Z = 1650mm. Turret - 12 Stations. S/No PM700021
    Sale has ended
  •  site
    LOT 2
    Daewoo (2001) Puma 300MB CNC - 3 Axis Turning & Milling Centre / CNC Lathe. With Fanuc 18i-T Control.
    With C Axis. Driven Tooling, Hydrafeed ML1B Mulitfeed Short Magazine CNC Barfeed. Turret - 12 Stations. S/No P30M0177
    Sale has ended
  •  site
    LOT 3
    Daewoo (2001) Puma 300B CNC - 2 Axis Turning Centre / CNC Lathe. With Fanuc 18i-T Control.
    Max Swing Over Bed 570mm. Max Turning Dia 400mm. Max Turning Length 648mm. Turret - 10 Stations. S/No PM300234
    Sale has ended
  •  site
    LOT 4
    Daewoo (2001) Puma 300B CNC - 2 Axis Turning Centre / CNC Lathe. With Fanuc 18i-T Control.
    Max Swing Over Bed 570mm. Max Turning Dia 400mm. Max Turning Length 648mm. Turret - 10 Stations. S/No PM300243
    Sale has ended
  •  site
    LOT 5
    OKK Model HM-63 Twin Pallet Horizontal Machining Centre. With Fanuc 16i-M Control.
    Twin Pallet Stations 630mm x 630mm. Spindle Nose 50 BT. ATC Capacity 80 Tools. With Through Spindle Coolant. S/No 102. Mft/No MA98310
    Sale has ended
  •  site
    LOT 6
    Daewoo (2002) Model ACE-VC500 Twin Pallet Vertical Machining Centre. With Fanuc 18i-M Control.
    Swivelling Machining Table: 2 x Clamping Surfaces 850mm x 660mm each. Spindle Nose 40BT. With 30 Station ATC. S/No AV5C0345
    Sale has ended
  •  site
    LOT 7
    Daewoo (2001) Model ACE-HP500 Twin Pallet Horizontal Machining Centre. With Fanuc 18i-M Control.
    Twin Pallet Stations 500mm x 500mm. Spindle Nose 50 BT. ATC Capacity 60 Tools. S/No HP500043
    Sale has ended
  •  site
    LOT 8
    Daewoo (2000) Model ACE-VC500 Twin Pallet Vertical Machining Centre. With Fanuc 18-M Control.
    Swivelling Machining Table: 2 x Clamping Surfaces 850mm x 660mm each. Spindle Nose 40BT. With 30 Station ATC. S/No AV5C0118
    Sale has ended
  •  site
    LOT 9
    Matsuura (1998) RA-4G Twin Pallet Vertical Machining Centre. With Yasnac J300M Control
    Twin Pallet Stations 1000mm x 490mm. Traverses X = 1020mm. Y = 550mm. Z = 510mm. Spindle Nose 50BT. ATC Capacity 40 Tools. M/c No 980513364
    Sale has ended
  •  site
    LOT 10
    Mori Seiki Model MV-40B/40 Twin Pallet Vertical Machining Centre. With MSC-516 Control
    Pallet Area 900mm x 380mm. Traverses X = 800mm. Y = 410mm. Z = 510mm. ATC Capacity 30 Tools. Spindle Nose 40BT. S/No 4351
    Sale has ended
  •  site
    LOT 11
  •  site
    LOT 12
    Mori Seiki (1995) SL-25MC 3 Axis Turning & Milling / CNC Lathe. With MSC-516 Control
    With C Axis. Driven Tooling, Hydrafeed ML1 Mulitfeed Short Magazine CNC Barfeed. 12 Station Turret, Tail Stock & Tool Setting Arm. S/No 1326
    Sale has ended
  •  site
    LOT 13
    Mori Seiki (1996) SL-25B - 2 Axis Turning Centre / CNC Lathe. With MSC-516 Control
    With With Hydrafeed ML1 Mulitfeed Short Magazine CNC Barfeed. 10 Station Turret, Tail Stock, 3 Jaw Chuck. Tool Setting Arm. S/No 7717
    Sale has ended
  •  site
    LOT 14
    Mori Seiki (1997) SL-250B - 2 Axis Turning Centre / CNC Lathe. With MSC-518 Control
    With 10 Station Turret, Tail Stock, 3 Jaw Chuck. Tool Setting Arm. S/No 146
    Sale has ended
  •  site
    LOT 15
    Mori Seiki (1996) SL-25B5 - 2 Axis Turning Centre / CNC Lathe. With MSC-516 Control
    With 10 Station Turret, Tail Stock, 3 Jaw Chuck. Tool Setting Arm. S/No 7917
    Sale has ended
  •  site
    LOT 16
    Brother (2000) Model TC-32A Twin Pallet Vertical CNC Tapping Centre with Brother CNC A00 Control
    Pallet Area Approx 550mm x 350mm each. Traverses:- X = 450mm, Y = 320mm, Z = 410mm. Spindle Nose NC5-46. With 26 Station ATC. S/No 111229
    Sale has ended
  •  site
    LOT 17
    Brother (2000) Model TC-32A Twin Pallet Vertical CNC Tapping Centre with Brother CNC A00 Control
    Pallet Area Approx 550mm x 350mm each. Traverses:- X = 450mm, Y = 320mm, Z = 410mm. Spindle Nose NC5-46. With 26 Station ATC. S/No 111230
    Sale has ended
  •  site
    LOT 18
    Brother (1996) Model TC-324N Twin Pallet Turret Type Vertical CNC Tapping Centre with Brother CNC-630 Control
    Pallet Area Approx 500mm x 300mm each. Traverses:- X = 420mm, Y = 320mm, Z = 260mm. Spindle Nose 30BT. With 14 Station Turret. S/No 111385
    Sale has ended
  •  site
    LOT 19
    Kira Model KV-3MC Vertical Machining Centre. With Fanuc 10M Control
    Table Area 695mm x 335mm. Spindle Nose 40BT. With 18 Station ATC.
    Sale has ended
  •  site
    LOT 20
    Kira Model KV-5MC Vertical Machining Centre. With Fanuc 10M Control
    Table Area 895mm x 405mm. Spindle Nose 40BT. With 20 Station ATC.
    Sale has ended
  •  site
    LOT 21
    Rusch Model 420A Automatic Horizontal Band Sawing Machine
    Capacity 420mm. With Roller Tracking. S/No R950709.
    Sale has ended
  •  site
    LOT 22
    XYZ (2000) Model XYZ 4000 Bed Type Vertical Milling Machine with 3 Axis DRO
    Table 1470mm x 355mm. Spindle Nose 40 ISO. Speeds 70 - 3600 RPM. S/No 9135
    Sale has ended
  •  site
    LOT 23
    XYZ (2001) Model XYZ 3000 Turret Milling Machine with 3 Axis DRO
    Table 1470mm x 305mm. Spindle Nose 40 ISO. Speeds 70 - 3600 RPM. S/No 9687
    Sale has ended
  •  site
    LOT 24
    Colchester Triumph 2000 Gap Bed Centre Lathe. Imperial Machine
    Swing over Bed 390mm Dia x 1270mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. S/No 6/0004/09447.
    Sale has ended
  •  site
    LOT 25
  •  site
    LOT 26
    Jones & Shipman Model 1310 Plain Cylindrical Grinding Machine
    Capacity 203mm Dia Swing x 457mm B.C. (8" x 18") S/No 48160
    Sale has ended
  •  site
    LOT 27
    Jakobsen Model SJ12 Horizontal Surface Grinding Machine
    Table Area 600mm x 190mm. Magnetic Chuck Size 600mm x 200mm. With Power Rise & Fall. S/No SJ12-BF10
    Sale has ended
  •  site
    LOT 28
    Myford MG12 Plain Hand Operated Cylindrical Grinding Machine
    Capacity 127mm Dia Swing x 305mm B.C. (5" x 12") S/No 847182
    Sale has ended
  •  site
    LOT 29
    Jones & Shipman 1300 Universal Cylindrical Grinding Machine
    Capacity 254mm Dia Swing x 685mm BC (10 x 27") With Internal Grinding Spindle, Swivel Wheel & Work Head.
    Sale has ended
  •  site
    LOT 30
    GP Model 65 Centreless Grinding Machine
    S/No 75474 - 1974
    Sale has ended
  •  site
    LOT 31
    Cincinnati Milacron Sabre 2000 Vertical Machining Centre. With Accramatic 850SX Control
    Table 2133mm x 762mm. ATC Capacity 21 Tools. Spindle Nose 40DV/Cat. 
    Sale has ended
  •  site
    LOT 32
    Herbert 2D Capstan Lathe. With Bar Feed
    With Collet Chuck & Bar Feed. S/No 4B-13085-Z
    Sale has ended
  •  site
    LOT 33
    Herbert 2D Capstan Lathe. With Bar Feed
    With Collet Chuck & Bar Feed. S/No 24-10036-J
    Sale has ended
  •  site
    LOT 34
    Cincinnati Powermatic 300 Series Duplex Horizontal Production Milling Machine
    Table 1676mm x 381mm (66" x 15") Spindles 50 Int. With Auto Quill Retraction. S/No 11B1036D5RE-10
    Sale has ended
  •  site
    LOT 35
    Herbert 2D Capstan Lathe
    With 3 Jaw Chuck. S/No 10-1030-B
    Sale has ended
  •  site
    LOT 36
    Herbert 4 Spindle Inline Drilling Machine
    All Spindles 3 Morse Taper with Hand Feed. Speeds 74-1450 RPM. S/No F45072
    Sale has ended
  •  site
    LOT 37
    Fellows Model 8AGS Gear Shaping Machine.
    Speeds - 6 off - 264 to 598 SPM. S/No 28-14029
    Sale has ended
  •  site
    LOT 38
  •  site
    LOT 39
    Matrix Model BV-15-48 Vertical Hydraulic Broaching Machine
    Capacity 15 Tons x 1219mm (48") S/No MAC3738
    Sale has ended
  •  site
    LOT 40
    Pollard Model 15AY Pillar Drilling Machine with Power Feeds
    Spindle Speeds 116 to 2850 RPM. Spindle Nose 3 Morse Taper. S/No 27221B
    Sale has ended
  •  site
    LOT 41
    Eley Millennium Co-Ordinate Measuring Machine
    Approx Dimensions: Granite Table Area 1524mm x 795mm. Distance Between Columns 700mm. Height Under Bridge 600mm. S/No M1065/C/028
    Sale has ended
  •  site
    LOT 42
    David Brown Model DMM-2008 Cylindrical Co-Ordinate Measuring Machine
    Approx Capacities:- Max Dia 280mm x 600mm B.C. S/No 12120
    Sale has ended
  •  site
    LOT 43
    DAF Model FA LF45.150 Curtain Sided Truck. First Registered 1 February 2005.
    2 Axle Rigid Body. Diesel Engine 3920 cc. 7500kg Gross Weight. Requires MOT & Road Tax
    Sale has ended
  •  site
    LOT 44
    TCM - Toyo Umpanki (2001) Model FD25Z5T - 2500 kg Diesel Powered Fork Lift Truck.
    Capacity with Attachment 2110kg. With Side Shift, Untested. S/No B32TE77355
    Sale has ended
  •  site
    LOT 45
    Electro - Arc Model 2 SA Metal Disintegrator - 10 KVA EDM
    Table Area 655mm x 460mm. S/No 262
    Sale has ended
  •  site
    LOT 46
    S&L Type G12V300-1 Pantographic Tapping Arm - Pneumatic Tapping Machine
    With Desouter Head. Table Area 1070mm x 750mm. S/No 92043265
    Sale has ended
  •  site
    LOT 47
    Nikken 4th Axis Rotary Table with Controller & P-125 Tail Stock
    Face Plate 170mm Dia. Suitable for / Used with Lot 20
    Sale has ended
  •  site
    LOT 48
    Nikken 4th Axis Rotary Table with Controller
    With Tail Stock. Face Plate 170mm Dia. Suitable for / Used with Lot 18
    Sale has ended
  •  site
    LOT 49
    Nikken 4th Axis Rotary Table with Controller
    Face Plate 170mm Dia. Suitable for / Used with Lot 18
    Sale has ended
  •  site
    LOT 50
    Nikken 4th Axis Rotary Table
    Note: Table Only No Controller
    Sale has ended
  •  site
    LOT 51
    Startrite Mercury Pillar Drilling Machine
    Spindle Nose No 2 Morse Taper. Speeds 95 - 3830RPM. Throat Approx 178mm
    Sale has ended
  •  site
    LOT 52
    Clarkson Mk 1 Tool & Cutter Grinding Machine
    Capacity 150mm x 305mm.
    Sale has ended
  •  site
    LOT 53
    Double Ended 6" Tool Grinding Machine
    Single Phase. Wheel Dia Approx 150mm
    Sale has ended
  •  site
    LOT 54
    RJH Single Wheel Tool Grinding / Lapping Machine
    Motor 0.5HP. Wheel Diameter Approx 150mm
    Sale has ended
  •  site
    LOT 55
    Brierley ZB32 Drill Point Grinding Machine.
    Capacity 32mm Dia. Complete with 6 Jaw Chuck & Cams. S/No 2609376042
    Sale has ended
  •  site
    LOT 56
    Rotajet Parts Washing Machine with Roller Tracking & Parts Baskets
    Pnuematic Opening Doors. Baskets Approx 760mm x 760mm x 250mm. Machine Opening Approx 750mm x 650mm High
    Sale has ended
  •  site
    LOT 57
    Walther Trowel Model CM250UK Vibratory Bowl Deburring / Surface Finishing Machine
    With Timer Control. Approx Bowl Dia 1130mm. Pnuematic Opening Acoustic Cover. S/No WTV1012 - 1989
    Sale has ended
  •  site
    LOT 58
    Fabricated Dip / Wash Tank with Electric Heater Elements & Pnuematic Loaders
    Approx Tank Dimensions 1500mm x 1050mm x 570mm Deep
    Sale has ended
  •  site
    LOT 59
  •  site
    LOT 60
    Mills C Frame Bench Mounted Hydraulic Power Press with Fabricated Bench
    Throat Approx 200mm. Bed Area 355mm x 300mm. S/No P56279
    Sale has ended
  •  site
    LOT 61
  •  site
    LOT 62
  •  site
    LOT 63
  •  site
    LOT 64
    Boge (2006) Model CL7 Air Compressor with Boge DAZ9 Dryer & Air Receiver
    Maximum Service Pressure 10 bar, Motor Power 5.5kw. S/No 5001054
    Sale has ended
  •  site
    LOT 65
  •  site
    LOT 66
  •  site
    LOT 67
  •  site
    LOT 68
    Norton Type 6DB Press - Customised with Hydraulic Cylinder
    Single Phase Hydraulic Pump. Throat Approx 300mm
    Sale has ended
  •  site
    LOT 69
    JB016V Pantographic Tapping Arm - Pneumatic Tapping Machine
    With Desoutter Head. Table Area 1150mm x 750mm.
    Sale has ended
  •  site
    LOT 70
    Ardox Crack Detector
    Sale has ended
  •  site
    LOT 71
    SIP Pillar Drilling Machine - Motor Requires Attention
    With 16mm Capacity Drill Chuck. Single Phase. Throat Approx 165mm. S/No 06120Q0021
    Sale has ended
  •  site
    LOT 72
  •  site
    LOT 73
    Funditor Parts Marking Machine
    S/No LMM
    Sale has ended
  •  site
    LOT 74
    Avery Model 3358 Electronic Platform Weighing Scales
    Single Phase - Capacity 60,000g x 1g
    Sale has ended
  •  site
    LOT 75
    Johnson & Allen Model DM33 Demagnetiser
    Opening 300mm x 300mm. S/No 5685
    Sale has ended
  •  site
    LOT 76
  •  site
    LOT 77
    Electric Oven Model PP12VS - Load 6kw
    Internal Dimensions 600mm x 600mm x 800mm High. S/No 98L006
    Sale has ended
  •  site
    LOT 78
  •  site
    LOT 79
    Avery Type 3202GFE Platform Weighing Scales
    S/No 8661149-17
    Sale has ended
  •  site
    LOT 80
    Barlow & Whitney Protective Wax Electric Melting Pot
    Single Phase. Internal Dimensions Approx 200mm Dia x 200mm Deep
    Sale has ended
  •  site
    LOT 81
    Shadowmaster Type R14XL Profile Projector with 2 Axis DRO & Storage Cupboard
    Screen Dia 320mm. Single Phase. S/No 5119
    Sale has ended
  •  site
    LOT 82
  •  site
    LOT 83
    Galileo Model A200 Hardness Tester.
    Throat Approx 200mm. S/No 109870
    Sale has ended
  •  site
    LOT 84
  •  site
    LOT 85
  •  site
    LOT 86
    Granite Inspection Surface Table with Fabricated Frame Legs
    Approx Size: 1205mm x 905mm x 150mm Thick. Height from Floor Approx 890mm
    Sale has ended
  •  site
    LOT 87
    Granite Inspection Surface Table with Fabricated Frame Legs
    Approx Size: 910mm x 600mm x 100mm Thick. Height from Floor Approx 860mm
    Sale has ended
  •  site
    LOT 88
    Taylor Hobson Talysurf Surface Finish Checking Machine
    Table Area Approx 620mmx 400mm
    Sale has ended
  •  site
    LOT 89
    Three off Metric External Micrometer Calipers. Starrett & M&W
    Sizes: 375mm-400mm, 400mm-425mm & 425mm-450mm
    Sale has ended
  •  site
    LOT 90
    Six off Metric External Micrometer Calipers. Starrett & M&W
    Sizes: 200mm-225mm, 225mm-250mm, 250mm-275mm, 275mm-300mm, 300mm-325mm & 325mm-350mm
    Sale has ended
  •  site
    LOT 91
    Six off Metric External Micrometer Calipers. Starrett & M&W
    Sizes: 175mm-200mm, 200mm-225mm, 250mm-275mm, 275mm-300mm, 300mm-325mm & 350mm-375mm
    Sale has ended
  •  site
    LOT 92
  •  site
    LOT 93
  •  site
    LOT 94
  •  site
    LOT 95
  •  site
    LOT 96
  •  site
    LOT 97
  •  site
    LOT 98
  •  site
    LOT 99
    Five off Imperial External Micrometer Calipers. Mitutoyo & M&W
    Sizes: 10"-11", 12"-13", 13"-14", 12"-16" & 16"-20"
    Sale has ended
  •  site
    LOT 100
    Five off Metric External Micrometer Calipers. M&W & Steinmeyer
    Sizes: 200mm-225mm, 225mm-250mm, 250mm-275mm, 400mm-425mm, 425mm & 450mm
    Sale has ended
  •  site
    LOT 101
    Fami 12 Drawer Tool Storage Unit with Contents of Mostley Metric Plug Gauges
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1150mm High
    Sale has ended
  •  site
    LOT 102
    Fami 12 Drawer Tool Storage Unit with Contents of Mostley Metric & Imperial Caliper & Thread Gauges
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1150mm High
    Sale has ended
  •  site
    LOT 103
    Fami 12 Drawer Tool Storage Unit with Contents of Mostley Imperial Plug Gauges
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1150mm High
    Sale has ended
  •  site
    LOT 104
    Fami 12 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1150mm High
    Sale has ended
  •  site
    LOT 105
    Fami Wooden Topped Work Bench with 3 Drawer Tool Storage Unit Under - No Contents
    Approx Dimensions:- 1500mm Wide x 800mm Deep x 750mm High
    Sale has ended
  •  site
    LOT 106
    Fami Wooden Topped Work Bench with 3 Drawer Tool Storage Unit Under - No Contents
    Approx Dimensions:- 1500mm Wide x 800mm Deep x 750mm High
    Sale has ended
  •  site
    LOT 107
    Fami Wooden Topped Work Bench with 8 Drawer Tool Storage Unit Under - No Contents
    Approx Dimensions:- 1500mm Wide x 750mm Deep x 920mm High
    Sale has ended
  •  site
    LOT 108
    Fami Wooden Topped Work Bench with 8 Drawer Tool Storage Unit Under - No Contents
    Approx Dimensions:- 1500mm Wide x 750mm Deep x 920mm High
    Sale has ended
  •  site
    LOT 109
    Metal 2 Door Storage Cupboard - No Contents
    Approx Dimensions:- 900mm Wide x 450mm Deep x 1800mm High
    Sale has ended
  •  site
    LOT 110
    Metal 2 Door Storage Cupboard - No Contents
    Approx Dimensions:- 900mm Wide x 450mm Deep x 1800mm High
    Sale has ended
  •  site
    LOT 111
    Four off Bisley Metal 4 Drawer Filing Cabinets
    One Sample Only Shown in Photograph
    Sale has ended
  •  site
    LOT 112
    Fami 3 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 575mm Deep x 850mm High
    Sale has ended
  •  site
    LOT 113
    Fami 12 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1500mm High
    Sale has ended
  •  site
    LOT 114
    Fami 12 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1500mm High
    Sale has ended
  •  site
    LOT 115
    Fami 12 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1500mm High
    Sale has ended
  •  site
    LOT 116
    Fami 12 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1500mm High
    Sale has ended
  •  site
    LOT 117
    Fami 12 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1500mm High
    Sale has ended
  •  site
    LOT 118
    Fami 12 Drawer Tool Storage Unit - No Contents
    Approx Dimensions:- 715mm Wide x 725mm Deep x 1500mm High
    Sale has ended
  •  site
    LOT 119
  •  site
    LOT 120
  •  site
    LOT 121
  •  site
    LOT 122
  •  site
    LOT 123
  •  site
    LOT 124
  •  site
    LOT 125
  •  site
    LOT 126
  •  site
    LOT 127
  •  site
    LOT 128
  •  site
    LOT 129
  •  site
    LOT 130
  •  site
    LOT 131
  •  site
    LOT 132
  •  site
    LOT 133
  •  site
    LOT 134
  •  site
    LOT 135
  •  site
    LOT 136
  •  site
    LOT 137
  •  site
    LOT 138
  •  site
    LOT 139
  •  site
    LOT 140
  •  site
    LOT 141
  •  site
    LOT 142
  •  site
    LOT 143
  •  site
    LOT 144
  •  site
    LOT 145
  •  site
    LOT 146
  •  site
    LOT 147
  •  site
    LOT 148
  •  site
    LOT 149
  •  site
    LOT 150
  •  site
    LOT 151
  •  site
    LOT 152
  •  site
    LOT 153
  •  site
    LOT 154
  •  site
    LOT 155
  •  site
    LOT 156
  •  site
    LOT 157
  •  site
    LOT 158
  •  site
    LOT 159
  •  site
    LOT 160
  •  site
    LOT 161
  •  site
    LOT 162
  •  site
    LOT 163
  •  site
    LOT 164
  •  site
    LOT 165
  •  site
    LOT 166
  •  site
    LOT 167
  •  site
    LOT 168
  •  site
    LOT 169
  •  site
    LOT 170
  •  site
    LOT 171
  •  site
    LOT 172
  •  site
    LOT 173
  •  site
    LOT 174
  •  site
    LOT 175
  •  site
    LOT 176
  •  site
    LOT 177
  •  site
    LOT 178
  •  site
    LOT 179
  •  site
    LOT 180
  •  site
    LOT 181
  •  site
    LOT 182
  •  site
    LOT 183
  •  site
    LOT 184
  •  site
    LOT 185
  •  site
    LOT 186
    Box - 2 off Vee Blocks with Box Angle Plate
    Box Angle 160mm x 130mm x 115mm
    Sale has ended
  •  site
    LOT 187
  •  site
    LOT 188
  •  site
    LOT 189
  •  site
    LOT 190
  •  site
    LOT 191
  •  site
    LOT 192
  •  site
    LOT 193
  •  site
    LOT 194
  •  site
    LOT 195
  •  site
    LOT 196
  •  site
    LOT 197
  •  site
    LOT 198
  •  site
    LOT 199
  •  site
    LOT 200
  •  site
    LOT 201
  •  site
    LOT 202
  •  site
    LOT 203
  •  site
    LOT 204
  •  site
    LOT 205
    Box - 2 off SPV Model SA-1E Tapping Heads & 1 off Adco Tapping Head
    All 2 Morse Taper Drive with Collets
    Sale has ended
  •  site
    LOT 206
  •  site
    LOT 207
    Box - 5 off Die Heads
    Sale has ended
  •  site
    LOT 208
  •  site
    LOT 209
  •  site
    LOT 210
  •  site
    LOT 211
  •  site
    LOT 212
  •  site
    LOT 213
  •  site
    LOT 214
  •  site
    LOT 215
  •  site
    LOT 216
    Vanco 25mm (1") Vertical Bench Linisher / Bandfacer
    Single Phase. S/No 11551
    Sale has ended
  •  site
    LOT 217
    Vanco 25mm (1") Vertical Bench Linisher / Bandfacer
    Single Phase. S/No 13302
    Sale has ended
  •  site
    LOT 218
    Clarke Model CDP 16FCN Bench Drilling Machine
    Single Phase. Capacity Approx 16mm (5/8") Throat Approx 150mm
    Sale has ended
  •  site
    LOT 219
    Clarke Model CDP 16FCN Bench Drilling Machine
    Single Phase. Capacity Approx 16mm (5/8") Throat Approx 150mm
    Sale has ended
  •  site
    LOT 220
  •  site
    LOT 221
    Reishauer Type KEM Chamfering Machine
    Single Phase. Rotary Cutter. S/No 5169
    Sale has ended
  •  site
    LOT 222
  •  site
    LOT 223
  •  site
    LOT 224
  •  site
    LOT 225
  •  site
    LOT 226
  •  site
    LOT 227
  •  site
    LOT 228
  •  site
    LOT 229
  •  site
    LOT 230
  •  site
    LOT 231
  •  site
    LOT 232
  •  site
    LOT 233
  •  site
    LOT 234
  •  site
    LOT 235
  •  site
    LOT 236
  •  site
    LOT 237
  •  site
    LOT 238
  •  site
    LOT 239
    Record No 25 Quick Release Engineers Bench Vice - 150mm Jaws, on Fabricated Metal Table
    Table Dimensions Approx 914mm x 431mm x 914mm High
    Sale has ended
  •  site
    LOT 240
    Excel Model GRB 202 Double Ended Pedestal Tool Grinding Machine
    Only Fitted with One Wire Brush
    Sale has ended
  •  site
    LOT 241
    Box - Two off Mitutoyo Metric Dial Type Bore Gauges
    Range 18mm - 35mm & 35mm - 60mm
    Sale has ended
  •  site
    LOT 242
  •  site
    LOT 243
  •  site
    LOT 244
  •  site
    LOT 245
    Box - 8 off Imperial Bore Micrometers - Shardlow & Tesa
    Sizes: 2 off .6"-.7", 2 off 3.6"-4", 1.2"-1.4", 1.4"-1.6", 1.6-2" & 2"-2.4" Plus 3 Setting Rings
    Sale has ended
  •  site
    LOT 246
  •  site
    LOT 247
    Quantity of Various Measuring Equipment
    Gauge Block Sets (Incomplete) Micrometers, Verniers etc. Some Items Require Attention
    Sale has ended
  •  site
    LOT 248
  •  site
    LOT 249
  •  site
    LOT 250
  •  site
    LOT 251
  •  site
    LOT 252
  •  site
    LOT 253
  •  site
    LOT 254
  •  site
    LOT 255
    Windley Double Sine Table
    Table Area 300mm x 200mm. S/No 605
    Sale has ended
  •  site
    LOT 256
  •  site
    LOT 257