Laboratory Equipment

Laboratory Equipment

Engineering labs require a variety of specialized equipment to perform experiments, test hypotheses, and develop new technologies.

What is in the Laboratory category?

The Laboratory category includes all Autoclaves, Balances, Baths, Biological Safety Cabinets, Bio-Rad Equipment, Block Heaters, Centrifuges, Cryogenic Equipment, Data Loggers, Fume Cabinets, Homogenisers, Hybridisation Ovens,  Co2 Incubators, Cooled Incubators, Refrigerated Shakers, Laminar Flow Cabinets, Luminometers, Microbiology Equipment, Microscopes, Laboratory Mixers, Osmometers, Laboratory Ovens, PCR Equipment.

Laboratory Equipment currently available

Filtering

(Showing 13 of 13 items)
Search
Country
  •  site
    View2020 HAOYUAN DX-27mini Stationary X-ray diffractometer
    Power: 600 W (40 kV, 15 mA) or 1200 W (40 kV, 30 mA); Stability: <0.005%. X-ray tube: Anode material - Cu; power: 2.4 kW; focal spot: 1 x 10 mm²; closed water cooling circuit. Vertical goniometer, θs-θd. Measurement radius: 150 mm. Scanning...
  •  site
    View2020 Thermo Fisher Nicolet iS50 Spectrometer FT-IR
    Step-Scan Control System and SST Electronics. High-speed scanning for fast kinetic detection. 0.09 cm -1 resolution. One-touch Touch Point sampling operation. Front/rear alignment mounting plates. High-speed USB 2.0 interface. Built-in wide...
  •  site
    View2020 MKS Cirrus 3 Mass Atmospheric Gas Analyser Spectrometer
    Monitors a wide range of gases from trace levels (ppb) to high levels. Compact, modular design for easy service and maintenance. Direct Ethernet interface – fully network compatible. Fast response – 250 data points per second and a capillar...
  •  site
    View2022 PROELEC PRO4000 Series Electrocoagulation reactor
    capacity of approximately: 0.5 m³. Includes temperature sensor, air diffuser, and electrode mounting holes. Load capacity of approximately: 50 Fe electrodes and 50 Aluminum electrodes, as well as connections between them. Main circuit break...
  •  site
    View2020 Linseis STA L81 TGA-DSC analyser SIN
    Temperature range: -150 to 2400°C. Vacuum: 10⁵mbar. Pressure: up to 5 bar. Heating rate 0.01 to 100°C/min. Temperature precision 0.01°C. Example robot optional 42. Resolution 0.025 µg 0.1 µg 0.1 µg. Sample weight 5g 25g 35/50g. Measuring ra...
  •  site
    ViewPie Scientific Tergeo-Plus Plasma Cleaner, low usage
    Large sample chamber (ID:160mm, L280mm). Enough to accommodate a 4-inch wafer boat and one 6-inch wafer; Chamber materials; Aluminum flange and thick-wall high purity quartz tube offer enhanced chemical resistance and reduction of alkali im...
  •  site
    ViewTerraUniversal - Ductless Exhaust Fume Hood - 2900-20
    High-capacity blower maintains air speed 181 fpm of vertical working room; Operation Status Indicator flashes if fan is not operational; Not for use with flammable or explosive materials; Static-Dissipative PVC cover, 120V, Mfg 6/18/19 (Lo...
  •  site
    View2020 SKYRAY INSTRUMENT ICP 3000 SPECTROMETER
    Diffraction grating: 52.67 Ip/mm, 64° blaze angle, Zerodur substrate. Prism: Ultra-pure Corning UV fused silica, transmittance 99.6% at 170nm. Wavelength Range: Standard: 175nm-900nm. Focal Length: 430mm. Resolution: 0.0068nm at 200nm. Opti...
  •  site
    ViewMegger MJ359 - AC & Hand Crank Megohmmeter / Line Analog Insulation Tester
    Output Test Voltage: 100, 250, 500, 1000; Insulation Resistance Range: 0 ohm to 2 Gig ohms; Resistance Range: 0.1 to 5000 ohms; Analog Display; Multiple test voltages for spot and step voltage testing. Includes Case. Serial #: 102087302 (L...
  •  site
    ViewChemGlass 50 L Process Reactor
    Motor Mount Arm Can Unlock and Swing Out Giving Greater Access to Reactor; Digital Temperature Monitor; Electric and XP Motor Has Separate Controller with Digital Display; Smaller Footprint Support Frame with Oversized Rugged S.S. Uprights ...
  •  site
    ViewThermo Scientific - Hyperclean TruAir Ductless Fume Hood - B1115241
    The ductless fume hood is self-contained and does not require venting to the outside. Portable and may be moved from one location to the next with minimal down-time and without filter changes. Set up, operation and filter maintenance are st...
  •  site
    View2020 Thermo Fisher PRISMA E Electron Microscope
    The Main Instrument (Prisma E) includes: 5-axis motorized stage with a 110 x 110 mm travel. Microscope controller with 2 x 24” LCD monitors. PC with Windows 10. 3 operating modes (high vacuum, low vacuum, and ESEM). Multi-stub holder for up...
  •  site
    View2020 LINSEIS STA L81 TGA-DSC Analyser
    Temperature range: -150 to 2400°C. Vacuum: 10⁵mbar. Pressure: up to 5 bar. Heating rate 0.01 to 100°C/min. Temperature precision 0.01°C. Example robot optional 42. Resolution 0.025 µg 0.1 µg 0.1 µg. Sample weight 5g 25g 35/50g. Measuring ra...

Laboratory Equipment FAQs

How do I collect my laboratory equipment?

We understand how stressful and complicated the removal of goods from a site can be. We endeavour to make this process as easy as possible for customers by suggesting a network of contractors in the shipping and removal industries.

Please see the service providers section for a full list of contractors.

Can I remove the item (s) myself?

Yes, providing that you or your contractor can fulfil the following criteria:

  • Public Liability Insurance
  • Licensing
  • Suitable Method Statement
  • Risk Assessment
  • Permits to Work
  • Capability and Competence

We will happily grant you access to the site once we’ve approved all of the documentation required.

What is an autobid?

An autobid is a feature used in some online auction websites that allows bidders to set a maximum bid amount they are willing to pay for an item. The website's bidding system then automatically places bids on behalf of the bidder up to their maximum bid amount, in increments that are predefined by the auction rules.

The use of autobids allows bidders to participate in auctions without needing to constantly monitor the auction and manually place bids. It also helps to prevent bid sniping, where a bidder places a last-minute bid to win the auction. However, it is important for bidders to carefully consider their maximum bid amount before using an autobid, as they may end up paying more than they intended if there are multiple bidders with high autobids.