Short Notice Sale - CNC Press Brakes 80–220T (2001–2022), AKBEND 4-Roll Bending Rolls & Extensive Sheet Metal Machinery
Starts: 06 October 2026 at 14:00 BST
Ends: 12 November 2026 at 14:00 GMT
Opportunity to acquire 2001-2022 CNC Press Brakes 80-220T from Bystronic, Amada, LVD, Ermaksan and more, 2015 Akbend 4-rolls Bending rolls, 2015 Baykal Gullotione and more sheet working machinery. Offers are strongly encouraged. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 17 of 17 lots
- LOT 1
![site]()
2007 4-axis ERMAKSAN CNCHAP 3100 x 200 CNC Press Brake with Delem ER70 Controller
Thrust: 200 T. Bending length: 3,100 mm. Approach speed: 100 mm/s. Control: Delem ER70. Motor: 15 kW. S/No: SN20070542 (2007). Note: Machine located in Walcz, Poland. - LOT 2
![site]()
2021 Bystronic Xact Smart 225/4100 CNC Press Brake with Bystronic ByVision Controller
Thrust: 225 T. Maximum working length: 4,100 mm. Maximum stroke: 200 mm. Rapid traverse speed: 140 mm/s. Working speed: 1–10 mm/s. Return speed: 115 mm/s. S.No: XACT21278SE (2021). Note: Machine located in Czestochowa, Poland. - LOT 3
![site]()
2022 Bystronic Xpress 80/2100 CNC Press Brake with BySoft Controller
Thrust: 80 T. Maximum working length: 2100 mm. Maximum stroke: 200 mm. S/No: Xpress 22334EU (2022). Note: Machine located in Czestochowa, Poland. - LOT 4
![site]()
2015 AKBEND (AKYAPAK) AHS 30/16 CNC 4-roll Bending Rolls
Working (bending) length: approx. 3, 100 mm. Bending/rolling thickness: typically up to approx. 20 mm (for standard steel) / 16 mm for the pre-bending process. Number of rolls: 4 (4-roll design, ensuring less deformation and a more secure grip on the material). Drive: Hydraulic. S./No: SY360-115. Note: Machine located in Warsaw, Poland. - LOT 5
![site]()
2015 Baykal MGH 3116 CNC Guillotine with Cybelec CybTouch 6 Controller
Maximum cutting length: 3,060 mm. Maximum sheet thickness (mild steel ≤ 450 N/mm²): 16 mm. Maximum sheet thickness (stainless steel ≤ 700 N/mm²): 10 mm. Cutting angle (fixed): 2.7°. Number of strokes per minute: 7 cuts/min. Main motor power: 30 kW. Backgauge range: 1000 mm (motorized, driven by ball screws with precise readout). Oil tank capacity: 220 liters. Control: Cybelec CybTouch 6. S/No: 22007 (2015) Note: Machine located in Warsaw, Poland. - LOT 6
![site]()
2020 Edwards Pearson EPT-CNC-ECO-175×3200 CNC Press Brake with tooling
Pressure: 175 tons. Max. Bending Length: 3200 mm. Axis: Y - beam up and down. X - stop approach and bending distance setting. R - stop up and down. Crowing (bending angle compensation). Control: EP10 CNC. Laser Guard: Lintech SLA-3. Foot Control: Wonder Foot. S/No: 201105B (2020). Note: Large selection of tools included. Note: Machine located in Czestochowa, Poland. - LOT 7
![site]()
2011 Bystronic Xpert 150 5-Axis CNC Press Brake with Bystronic CNC Control
Pressure: 150 tons. Bending length: 4100 mm. Max. stroke: 215 mm. Axis: Y - beam up and down. X - stop approach and bending distance setting. R - stop up and down. Z2 - stops sideways and towards each other. Z1 - manual feed. Automatic stops. Bystronic Fast Bend laser system. S/No: 11530057 (2011). Note: Machine located in Czestochowa, Poland. - LOT 8
![site]()
2021 Baykal APHS 41240 4-Axis CNC Press Brake with Delem DA-66T Control
Pressure: 240 tons. Bending length: 4100 mm. Control: Delem DA-66T. Axles: Y - beam up/down, X - stop approach and bending distance setting, R - stop up/down, Crowing (bending angle compensation). Power supply: 3-phase. S/No: 28635. Note: Equipped with a large set of bending tools. S/No.28635 (10/2021). Note: Machine located in Czestochowa, Poland. - LOT 9
![site]()
2006 AMADA HFT 170-4 L CNC Press Brake with Amada Controller
Thrust: 170 T. Bending length: 4,230 mm. Distance between columns: 3,760 mm. Maximum stroke: 350 mm. Axes: Y1,Y2,X1,R1. Weight: 14,800 kg. Serial number: HFT 170-4 L N060097 (2006). Note: Machine located in Czestochowa, Poland. - LOT 10
![site]()
2009 Morgan Rushworth PB CNC 3100/160 CNC Press Brake with Cybelec DNC 60 Controller
Thrust: 160 T. Bending length: 3,100 mm. Maximum sheet thickness: 6 mm (based on a material tensile strength of 45 kg/mm²). Control: Cybelec DNC 60. S/No: SN20090122 (2009) - LOT 11
![site]()
2006 LVD PPEBturbo 220/30 CNC Press Brake with LVD Cadman CNC Controller
Thrust: 220 T. Working length: 3,050 mm. Distance between columns: 2,600 mm. Max. ram stroke: 450 mm. Max. table-to-ram distance: 685 mm. Throat depth: 450 mm. X-axis travel: 600 mm. Table width: 120 mm. Speeds: Approach speed: 120 mm/s. Working speed: 21 mm/s. Return speed: 200 mm/s. Drive and hydraulics: Motor power: 37 kW. Power supply: 400 V. Pump: variable-displacement. Hydraulics: Bosch / Rexroth SYDFE1. Oil tank capacity: 350 l. Control system: LVD Cadman CNC/ Axes: Y – upper beam (up/down), X – backgauge positioning and bend depth adjustment, R – backgauge (up/down), 2 x Z – lateral movement of backgauge fingers, Z2 – front/rear movement with slight X-axis inclination, V-Easy Form laser, Crowing (deflection compensation). S/No: 30494 (2006). Note: Machine located in Czestochowa, Poland. - LOT 12
![site]()
2001 LVD PPEB 170/42 5-Axis CNC Press Brake with CADMAN CNC Control
Maximum pressing force: 170 tons. Bending length: 4270 mm. Y1, Y2, R, X axes. Crowning bending angle compensation. Distance between upright: 3820 mm. Stroke: 200 mm. Max distance between ram and table: 400 mm. Depth of the gap: 400 mm. Control: CADMAN. S/No: 27755 (2001). Note: Machine located in Czestochowa, Poland. - LOT 13
![site]()
2002 LVD PPEB 135/3050 135T CNC Press Brake with LVD Cadman CNC Controller
Thrust: 135 T. Bending length: 3050 mm. Servo-hydraulic bending system. Precise ram positioning via linear encoder. Large quantity of tooling available. Control: LVD Cadman CNC. S/No: 28414 (2002). Note: Machine located in Czestochowa, Poland. - LOT 14
![site]()
1999 LVD PPEB110/30 CAD-CNC 110T CNC Press Brake with LVD Controller and tooling
Thrust: 110 T. Bending length: 3050 mm. Servo-hydraulic bending system. Precise ram positioning via linear encoder. Large quantity of tooling available. S/No: 26225 (1999) - LOT 15
![site]()
1998 ASPA Zpb-120 Spot Welder
Power: 120 kVA. Electrode force: 600 daN. S/No: 98120001. Note: Machine located in Walcz, Poland. - LOT 16
![site]()
ASPA Zpe-25 Spot Welder
Power: 25 kVA. Electrode force: 50:370 daN. S/No: 027785. Note: Machine located in Walcz, Poland.
Essential Information
General Information
- Auction Dates
- Starts: 06 October 2026 at 14:00 BSTEnds: 12 November 2026 at 14:00 GMT
- Site Address
- MULTI LOCATIONPlease see individual lots for asset locationPoland
- Viewing Days
- By Appointment OnlyStrictly by appointment.
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- A link to the invoice will be emailed to successful bidders
- Payment is due immediately on receipt of invoice
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque
- NB: Please reference invoice number on bank transfer.
Goods
- Clearance days
- 16 November 2026 at 07:00 GMT - 20 November 2026 at 14:00 GMTStrictly by appointment.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all transport and rigging charges.
- Items are only available for collection once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- For a list of companies that can assist with removals and transportation please visit the Apex Auctions website's Service Providers section.
- Sales Contacts
- Auction informationZuzanna Bodziachowska-KluzaAlmax Spolka Cywilna
Częstochowa
42-200
Poland zkluza@apex-group.com+48 34 888 1030