Metalworking auction with 2021 Kimla Milling Machine, 2011 Dugard Lathe, SMG Press and more
Starts: 20 August 2026 at 11:00 BST
Ends: 22 September 2026 at 14:00 BST
Metalworking auction with 2021 Kimla Milling Machine, 2011 Dugard Lathe, SMG Press and Ajan Plasma Cutting Machine and more. Note: See lots for location. Please refer to the Sale Information section for details of any additional fees that may apply upon purchase. Please note: All closing bids are subject to vendor approval prior to Apex issuing final invoices.
Share:
Showing 18 of 18 lots
- LOT 1
![site]()
2021 KIMLA BFN 1007 Linear CNC Gantry Milling Machine
Table: 1000 x 750 mm, Working travel: 1000/700/300 mm, Spindle rpm: 24000 rpm, Spindle power: 19 kW, Tool chuck: HSK63F, Tools magazine: 20 pieces, Control: CNC, S/No: 3626 (2021), Machine weight: 5600 kg, Note: ONLY 623 spindle hours. - LOT 2
![site]()
2011 Dugard 1000Y CNC Vertical Machining Centre
X-axis travel 1020 mm, Y-axis travel 610 mm, Z-axis travel 510 mm. Control: FANUC 0i-MD. Table: 1200 x 600 mm. Max. workpiece weight: 600 kg. Tool magazine: 30 pcs. Tool chuck: BT chuck 40. Max. spindle speed: 12000 rpm. Spindle motor power: 18.5 kW - LOT 3
![site]()
2017 Hyundai Wia F500 PLUS CNC Vertical Machining Center
Control: Siemens 828D, X-axis Travel: 1060 mm, Y-axis Travel: 510 mm, Z-axis Travel: 635 mm, Spindle Nose to Table Center Distance: 150 ~ 785 mm, Worktable Table Working Surface: 1200 x 500 mm, Maximum Table Load: 800 kg, T-Slot: 5 x 18 x 100 mm, Spindle Spindle Taper NT 40 BT 40, Maximum Spindle Speed: 8000 rpm, Spindle Power (Constant/30 min): 11/15 kW, Torque (Constant/30 min): 143/286 Nm Feeds, Rapid Feeds X/Y/Z Axes: 36/36/30 m/min, Feedrate X/Y/Z: 1~15000 m/min, Tool Magazine Capacity: 30 pcs, Magazine Type: Intermediate Clamp, Maximum Tool Diameter: Ø90/Ø150 mm, Maximum Tool Length: 300 mm, Maximum Tool Weight: 8kg, Cooling Coolant Tank Capacity: 350 l, Pump Power: 0.25/0.40 kW, Maximum Power Consumption: 23 kVA, Air Supply Pressure: 5.5 +-1 bar, Air Consumption: 110 l/min,S hopMill + 3D Simulation, Side Chip Conveyor (Belt), Basket for Chips, High cooling pressure: 20 bar - LOT 4
![site]()
2006 MAZAK Nexus VCN-510C
Control: MAZATROL 640M. Travel X: 1,050 mm. Travel Y: 510 mm. Travel Z: 510 mm. Automatic Tool Changer (ATC): 30 psc. Centralized Lubrication. Note: Very Few Operating Hours - LOT 7
![site]()
2005 Dugard Eagle 200 CNC Lathe
Max. turning length 508 mm, Max. turning diameter 280 mm, CNC type FANUC Series 0i Mate-TB, X axis 176 mm, Z axis 520 mm, Spindle bore 62 mm, Spindle speed 4500 rpm, Spindle motor power 11 kW, Weight 3400 kg - LOT 8
![site]()
1987 SMG Pressen type HSP-T 200-850/850
Ram force: 2000 kN. Ram retraction force: 250 kN. Ram stroke: 50 mm. Table size: 850 mm/850 mm. Drive power: 45 kW. Accelerated down/up speed: 100/100 mm/s. Side ram opening: 650 mm x 450 mm. Operating voltage: 380 VAC. Control voltage: 220 VAC. Valve voltage: 24 VDC. Oil capacity: 1000 l - LOT 9
![site]()
2010 Ajan 3000x6000 Plasma Machine
Table: 3000 x 6000 mm. The pipe cutting attachment (BMK300) allows for processing pipes up to 300 mm in diameter, up to 6 m in length, and with a wall diameter of up to 20 mm. Plasma unit: Ajan PP 260 A. 2010 Dust extraction unit: 7.5 kW. 2010 Jet filter: Blocks. Input pressure: 6 Bar. Machine S/No: YP10006 (2010) - LOT 10
![site]()
1999 Doosan VM50 CNC Vertical Machining Center
Axis range: X = 610 mm / Y = 760 mm / Z = 510 mm. S/No: MVH1009. Control: Siemens. Spindle taper: BT40. Spindle speed: 0 – 8000 rpm. Worktable: 700 × 520 mm. Tool magazine: ATC 12 (with arm). Chip extraction. Spindle cooler - LOT 12
![site]()
Gildemeister AS32
Maximum turning diameter: 32mm. Machine with tooling and mounting sleeves - LOT 13
![site]()
1991 Hitachi Seiki Hitec Turn 25S CNC Lathe
Spindle bore: 65mm. Control: YASNAC LX3. 12-tool VDI40 turret. Full documentation - LOT 15
![site]()
2018 Gföllner/Spinner Climate Controlled Secure Container
Climate controlled secure container with built in air conditioning, heating, and lighting. LG PN24SP.UUE Air Conditioner. LG Smart Inverter. - LOT 16
![site]()
2017 Gföllner/Spinner Climate Controlled Secure Container
Climate controlled secure container with built in air conditioning, heating, and lighting. LG PN24SP.UUE Air Conditioner. LG Smart Inverter. - LOT 17
![site]()
Container Compressed Air Station with 2020 Screw Compressor Compair L15-7 5 A 2020
Container: 2020 Compair L15-7 5 A - LOT 18
![site]()
Container Compressed Air Station with CompAir CYCLON 107 + CompAir L15-7.5 Compressors
1996 CompAir CYCLON 107 Screw Compressor. Maximum Pressure: 8.2 bar. Power: 9.27 kW. Motor Speed: 2960 rpm. Power Supply: 380–415 V / 3 Phase / 50 Hz. Capacity: approx. 1.14 m³/min. CompAir L15-7.5 Screw Compressor. Motor Power: 15 kW. Operating Pressure: 7.5 bar. Capacity: approx. 2.7 m³/min. Power Supply: 400 V / 3 Phase / 50 Hz. 2008 Compressed Air Tanks Rednal Pneumatics (UK). Capacity: 200 liters (each). Maximum operating pressure: 12 bar. Test pressure: 18 bar. Standard: BS EN 286-1. Refrigeration dryer F25T. Power supply: 230 V / 1 phase / 50 Hz. Power: 0.72 kW. Refrigerant: R134a. Protection rating: IP22. 5 Additional accessories. Inline filters. Internal piping. Exhaust fans. Electric container heating (year-round operation). Steel container with service door. Ready-to-connect installation. - LOT 19
![site]()
2021 Schilling Signomat S100 Electrochemical Marking Device
Dimensions: 265 x 95 x 275 mm, Mains voltage: 115/230 V 50/60 Hz (automatic recognition), Marking voltage: 12 V / 18 V / 24 V, Marking current: 3,9 A, Current types: dark or light, Output: 100 VA, Weight: 4,4 kg, Noise level: 20 dB, Operation modes: - manual stamp with automatic start-up, - manual marking together with a foot switch, - pneumatic stroke started by a foot switch, S/No: 14397 (2021) - LOT 20
![site]()
2009 GRAVOTECH IS200 Engraving Plotter
Working space: 225 x 80 mm, Maximum length of the engraved workpiece: unlimited, Maximum opening and jaw opening: 140 mm, Jaw height: 16 mm, Gauge between spindle and jaws: 14 mm, Standard spindle: Rotary type, loaded from the top, Diameter: 4.36 mm, Maximum rotation speed: 17,000 rpm, Spindle feed speed: Engraving unit (passive mode): 27 mm/s, Engraving unit: 25 mm/s, Spindle feed: Z axis: 15 mm, Dimensions: 500 x 455 x 295 mm, Weight: 20 kg, S/No: 74731-10 (2009)
Essential Information
General Information
- Auction Dates
- Starts: 20 August 2026 at 11:00 BSTEnds: 22 September 2026 at 14:00 BST
- Site Address
- Multiple locations, please see lot descriptions for address.Poland
- Viewing Days
- By Appointment OnlyStrictly by appointment, please contact Apex.
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- A link to the invoice will be emailed to successful bidders
- Payment is due immediately on receipt of invoice
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque
- NB: Please reference invoice number on bank transfer.
Goods
- Clearance days
- 30 September 2026 at 08:00 BST - 09 October 2026 at 14:00 BSTStrictly by appointment, please see notes on each lot description.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all transport and rigging charges.
- Items are only available for collection once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- For a list of companies that can assist with removals and transportation please visit the Apex Auctions website's Service Providers section.
- Sales Contacts
- Auction informationZuzanna Bodziachowska-KluzaAlmax Spolka Cywilna
Częstochowa
42-200
Poland zkluza@apex-group.com+48 34 888 1030