Business Closure Sale – Precision Fabrication Equipment & Machinery
Starts: 19 January 2026 at 16:30 GMT
Ends: 18 February 2026 at 15:00 GMT
This business closure sale features a range of industrial machinery and workshop equipment, including a Combilift 5000 kg Multi-Directional Side Forklift, a Mengele H400‑3 400 Tone Vertical Press Brake, a KERF RUR 3000P CNC Plasma Cutting Machine, an Asquith NCA 4A6 Bridge-Type Drilling Machine, Linde forklifts, general workshop tools, and much more. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 52 of 52 lots
- LOT 1
![site]()
Combilift 5000kg Multi Directional Side Forklift (2019)
Diesel Engine. Lift Height Approx 4,040mm. Platform Length Approx 1,200mm. Mast Travel Approx 1,340mm. Mask Maximum Raised Approx 5,000mm, Height Mast Closed Approx 2,990mm. 3-Wheel Hydrostatic Drive. Load Centre 600mm. S/No. 43447. - LOT 2
![site]()
Mengele H400-3 400 Tonne Vertical Press Brake with GWF DNC 80 CNC Control (1986)
Cybelec V-DNC-83-PS CNC Control. Working Length Approx 4,000mm. Table Dimensions Approx 4,000mm x 250mm Deep with (3) T-Slots. Maximum Stroke Approx 500mm. 12mm Over Run Distance. Clearance 240mm. Operating Pressure 240 Bar. Back Gauge with Safety Cage. Foot Pedal Control. Separate Electrical Cabinet. Power: 415 Volt. S/No. 10443. - LOT 3
![site]()
Kerf RUR 3000P CNC Plasma Cutting Machine & Burny 10 LCD Plus CNC Control (2022)
With Lincoln Fineline 300HD CE Power Source. Bed Dimensions Approx 2,500mm Wide x 10,000mm Long. Maximum Cutting Capacity Approx 35mm. Single Torch Magnum Pro BK 602622. Fineline Automatic Gas Console. Kaliburn Inova Torch Height Control System, 230 VAC. S/No. of Machine 02171. - LOT 4
![site]()
Linde H45D-02 4.5 Tonne Capacity Diesel Powered Forklift (2018)
Lift Height Approx 4,400mm. Fork Length Approx 1,200mm. - LOT 5
![site]()
Linde H40D-02 4 Tonne Capacity Diesel Powered Forklift (2018)
Lift Height Approx 3,000mm. Fork Length Approx 1,200mm. - LOT 6
![site]()
Griesheim Messer Omnimat L 7000 Heavy Duty Thermal Cutting Machine with Messer Cutting Systems CNC Control (1997)
With & Komatsu Hanomag Power Source. Working Dimensions of Bed Approx 6,000mm Wide x 8,000mm Long. Machine Capacity Currently 150mm although Capable to Cut 300mm with Suitable Consumables. (6) Oxy/Fuel Torch Heads. Separate Electrical Cabinet, Power Source 415 Volt. S/No. 260.043 - LOT 7
![site]()
Asquith NCA 4A6 Bridge Type Drilling Machine with Telemecanique NUM 720 CNC Control (1981)
Table Size Approx 2,440mm x 1,450mm. Working Dimensions Approx 1,220mm x 1,830mm with (8) T-Slots. Load Carrying Capacity of Table Approx 3,000kg (Spread). Distance from Spindle Nose to Table Approx 450mm. Amount of Elevation Approx 690mm. Spindle Ø 68mm. 50 International Bristol Erikson Spindle Nose Taper. Spindle Traverse 355mm. 18 Select Speeds, 3 Lever, Range 10 - 2,000 RPM. S/No. P37210. - LOT 8
![site]()
Matterson 10-Ton Twin Beam Top Mounted Overhead Crane. Approx 15 Metre Span
Access Walkway & Safety Rail. Hoist & Trolley Mechanism with Pendant Control - LOT 9
![site]()
Matterson 10-Ton Twin Beam Top Mounted Overhead Crane. Approx 15 Metre Span
Access Walkway & Safety Rail. Hoist & Trolley Mechanism with Pendant Control - LOT 10
![site]()
Matterson 10-Ton Twin Beam Top Mounted Overhead Crane. Approx 15 Metre Span
Access Walkway & Safety Rail. Hoist & Trolley Mechanism with Pendant Control - LOT 11
![site]()
Matterson 10-Ton Twin Beam Top Mounted Overhead Crane. Approx 15 Metre Span
Access Walkway & Safety Rail. Hoist & Trolley Mechanism with Pendant Control - LOT 12
![site]()
Matterson 10-Ton Twin Beam Top Mounted Overhead Crane. Approx 15 Metre Span
Access Walkway & Safety Rail. Hoist & Trolley Mechanism with Pendant Control - LOT 13
![site]()
Shotblast Engineering Systems 4D/1525/1000 Plate & Section Shot Blast Cleaning Machine (2005)
With with HSE CK12 7.5 Extractor System. Super Universal 4-Wheel Shot Blast System. Max Plate Width 1,525mm, Max Plate Thickness 90mm, Minimum Plate Thickness 3mm, Minimum Plate Length 2,800mm. Max Section Height 914mm. Max Pipe Ø 800mm. Max Hollow Section 700mm. Loading & Exit Rail System, Dimensions Approx 6,000mm x 2,000mm Wide with Transport Bogies. Blast Chamber Tunnel Entrance Dimensions Approx 2,000mm Wide x 1,300mm High. Chamber Height Approx 5,200mm Plus Approx 1,300mm into the Pit. Exit Chamber Area. Recirculation of Used Abrasive. Exhausted Abrasive sent via Blow Off Separator System to the Health & Safety Engineering CK12 7.5 Extraction Unit with Twin bin Compartment & Collection Bins. - LOT 14
![site]()
Still EVC 10 1000kg Capacity Electric Pallet Stacker with Built-in Charger (2021)
LED Display. Rated Lift Approx 3,220mm. Speed Approx 4.8Km/Hour with Auto Speed Reduction. (2) 12-Volt Batteries. - LOT 15
![site]()
Hyster S1.0C 1000kg Capacity Electric Pallet Stacker (2004)
24 Volt Battery with Hoppecke Charger. 3,370mm Lift, Mast Extends up to 3,960mm. - LOT 16
![site]()
Counterbalance Floor Crane 550kg Capacity
Double Acting Hydraulic Pump. (5) Variable Capacity Settings - 920mm (550kg) to 2,100mm (150kg) Reach. - LOT 17
![site]()
Morgan 2,000mm Wide Heavy Duty Pyramid Powered Bending Rolls
Length of Rolls 2,300mm. Power Supply 415 Volt. Telemecanique Control. - LOT 18
![site]()
Thonney Topermatic AS 315 Floor Mounted Heavy Duty Vibratory Tumbler (1989)
Dimensions of Tumbler Tank Approx 800mm x 350mm. S/No. 316. - LOT 19
![site]()
Machine Tapping Company Bench Mounted Pneumatic Tapping Arm on T-Slotted Cast Iron Table
Complete with Perfect 150mm Width of Jaw Vice. Table Dimensions (with 5 T-Slots) Approx 900mm x 800mm x 800mm High. - LOT 20
![site]()
Cuoghi APE 40 Semi Automatic Twist Drill Sharpener Mounted on Single Door Cabinet (2003)
6-Jaw Precision Chuck. Sharpens Drills & Taps Range 2mm-40mm. Point Angle Grinding Range 40° - 180°. Push Button Control Panel. - LOT 21
![site]()
Brierley Drill Point Grinder Mounted on Single Door Cabinet
Drill Size Range 1.5mm - 25mm. Point Angle 40° - 180°. Working Tilting Angle 0-20°. (1) 4-Jaw Chuck. Crompton Series 2000 Push Button Control. 'Gryphon B-Rise' Motor. Max Spindle Speed 3,600RPM. - LOT 22
![site]()
Alpina HG-8A 200mm Double Ended Bench Grinder on Fabricated Stand
Maximum Spindle Speed 2,850RPM. Size of Wheel 200mm x 25mm x 16mm Bore. 240 Volt Power Supply - LOT 23
![site]()
PRS-76 Floor Mounted Combined Tube & Profile End Grinder (2008)
Grinding Range Ø 20mm - 76mm. Adjustable Slide 30° - 90°. Normal Belt Size 100mm x 2,000mm (Currently using 80mm wide). S/No 0170. - LOT 24
![site]()
Meddings Pacera Pillar Drill
1/2" Capacity Drill Chuck, 2 Morse Taper. Table Size 250mm x 250mm. Spindle Speeds Approx 80-4,000RPM. Throat Depth Approx 200mm. Rise & Fall Table. S/No. MF22, 28969. - LOT 25
![site]()
Kemper System 8000 Extraction & Filter Unit with Kemper Digital Readout (2008)
Type 811000250. Motor Output 7.5kW. S/No. 208270. - LOT 26
![site]()
Kemper Profimaster IFA Mobile Smoke & Dust Extraction Unit (2018)
4-Metre Flexible Exhaust Arm. 2-Stage Filtration. 360° Swivel Hood. S/No. 181100136 - LOT 27
![site]()
Herbert Single Spindle Pillar Drill
Table Dimensions Approx 330mm x 390mm with (2) T-Slots. 2-MT Arbor Fitted with 16mm Capacity Drill Chuck. Rise & Fall Table. - LOT 28
![site]()
Floor Mounted Belt Sander
Gryphon TEFC Brook Motor, 415 Volt Power Supply. Belt Size 100mm x 915mm. Push Button Control. - LOT 29
![site]()
- LOT 30
![site]()
Eun Sung 1,000mm x 1,000mm x 190mm Thick Granite Surface Plate on Fabricated Stand
Stand Dimensions Approx 700mm x 700mm x 600mm High. Plus (1) 460mm x 360mm Cast Iron Surface Plate - LOT 31
![site]()
Ajax PD-16 16mm Capacity Bench Drill (1977)
(5) Gear, Spindle Speeds 455 - 2,630RPM. Rise & Fall Table, Dimensions 270mm x 270mm. S/No. 26939 - LOT 34
![site]()
Idealarc R3S-600 Constant Voltage DC Welding Power Source
Complete with Lead & Clamps. 600 Amp, 415 Volt Power Source, 3-Phase. - LOT 36
![site]()
Mark MSA15 270 DG2 15kW Compressor with ES 3000 Control (2018)
Complete with Stand Alone Mark 'DRY(C55) A4 5015' Dryer, Built-In Receiver & Sterling CS75 Wall Mounted Water/Oil Separator - LOT 37
![site]()
- LOT 38
![site]()
- LOT 39
![site]()
- LOT 40
![site]()
- LOT 41
![site]()
- LOT 42
![site]()
- LOT 43
![site]()
- LOT 44
![site]()
- LOT 45
![site]()
- LOT 46
![site]()
- LOT 47
![site]()
- LOT 48
![site]()
- LOT 49
![site]()
- LOT 50
![site]()
- LOT 51
![site]()
T-Slot Table with EMV 8" Vice & Arbor Assembly Pot
Dimensions of Table Approx 1,200mm x 800mm x 800mm High. (5) T-Slots. Single Shelf - LOT 52
![site]()
- LOT 53
![site]()
- LOT 54
![site]()
Dismantled Python Cranes Freestanding Jib Crane
Column Height Approx 3,000mm, Jib Arm Length Approx 4,000mm
Essential Information
General Information
- Auction Dates
- Starts: 19 January 2026 at 16:30 GMTEnds: 18 February 2026 at 15:00 GMT
- Site Address
- LONDONDERRY WORKSEAHAM SR7 7SLUnited Kingdom
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 23 February 2026 at 09:00 GMT - 13 March 2026 at 16:00 GMTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationAnais Tournois69 Middle Street
Brighton
Please Select
BN11AL
United Kingdom info@apexauctions.co.uk+44 1273 224466