Gardner Denver Ltd

Max Swing Over Bed 700mm. Swing Over Saddle 590mm Dia. Max Turning Length 1043mm. Traverses X = 362mm Z = 1105mm

With Driven Tooling / Milling. Max Swing Over Bed 710mm. Max Turning Dia 650mm. Max Turning Length 863mm. Traverses X = 345mm Z = 900mm. Turret - 12 Stations

Table 1120mm x 600mm. Traverses X = 1020mm. Y = 510mm. Z = 560mm. ATC Capacity 21 Tools. Spindle Nose 40DV/Cat.

Table 1120mm x 600mm. Traverses X = 1020mm. Y = 510mm. Z = 560mm. ATC Capacity 21 Tools. Spindle Nose 40DV/Cat.

With Driven Tooling / Milling. Irco Type DS44.8 893 Long CNC Bar Feeder. Max Swing Over Bed 520mm. Max Turning Length 530mm. Turrets - 12 + 8 Stations.

Note: Control Requires Attention - Advised that Cooling Fans Not Working. With Driven Tooling / Milling. Irco Long CNC Bar Feeder. Max Swing Over Bed 520mm. Max Turning Length 530mm. Turrets - 12 + 8 Stations.

Capacity:- 460mm Dia Swing x 1000mm B.C.

Table 1200mm x 320mm. Spindle Nose 40 ISO. Speeds 70 to 3800 RPM.

Capacity:- 660mm Dia Swing x 2300mm B.C. With Duplomatic 8 Station Turret

Pallet Size 545mm Dia. Spindle Nose 50DV /Cat. With 60 Position ATC.

Throat Approx 1500mm. Spindle Nose No 5 Morse Taper. Speeds 28 - 2500 RPM.

Capacity 13mm x 2530mm. With Power Back Guage / DRO. Squaring Arm, Support Arms, Rapid Blade Gap Adjustment. Foot Pedal Operation

Capacity 3.1mm x 2540mm (1/8" x 100") With Hand Operated Back Gauge

Raised Centre Height - Capacity 450mm Dia Swing x 1500mm B.C. With Swing Down Internal Grinding Attachment

Capacity 315mm Dia Swing x 1000mm B.C. With Swing Down Internal Grinding Attachment

Capacity 355mm Dia Swing x 685mm B.C.(14" x 27")

For "Honing Big Pieces" Range 19mm to 203mm Dia

Variable Speeds 50 - 475 RPM. Component Bore Diameter Range 19mm to 203mm. Max Stroke 610mm. Throat 394mm

With 220mm Dia Face Plate & 208mm Dia 3 Jaw Chuck

With 220mm Dia Face Plate & Separate 3 Jaw Chuck

Spindle Nose 4 Morse Taper. Table Size 760mm x 400mm. Spindle Speeds 37 - 1700RPM

Max Dia Swing 432mm x 1219mm B.C. (17" x 48") Spindle Speeds 13.4 - 1230 RPM

Swing over Bed 400mm Dia x 1000mm B.C.

Table 1066mm x 228mm with 100mm Column Raiser Block, Power Long Feed. Spindle Nose R8

With Power Feed, Spindle 4 Morse Taper. Compound Quick Locking Table 600mm x 325.

With Rotary Table - 508mm (20") Diameter. Adjustable Stroke

With 650mm Dia Segmental Grinding Wheel. Electromagnetic Chuck 1828mm x 558mm (72" x 22")

Throat Approx 1080mm.

Blade 280mm Dia. With Pneumatic Power Vice & Coolant

Capacity 360mm x 360mm. Automatic Feed Vices. With Roller Tracking

With Work Head, Centres & Dust Extractor

With Work Head, Centres & Dust Extractor

With Motorised Double Swivel Wheel Head, Motorised Work Head, Tail Stock & Dust Extractor

Max Drill Dia 3" - (Approx 76mm) With Quantity of Guides & Bushes

Capacity 304mm x 152mm (12" x 6") With Workhead

Capacity 200mm Dia Swing x 450mm B.C. Swivelling Work Head

Table / Magnetic Chuck 410mm Dia. Grinding Wheel 305mm Dia.

Main Rotary Table 914mm Dia. With 3 off 419mm Dia Rings

Table Area 457mm x 152mm (18" x 6") Magnetic Chuck 457mm x 152mm

Size Approx 6840mm x 5320mm x 4880mm High. Open End Design with Roof Cut Out to Allow the Use of Overhead Crane. With Lighting

Size Approx 6080mm x 2280mm x 2240mm High. Open Front Design. With Lighting

Size Approx 3040mm x 2280mm x 1980mm High. Open Front Design. With Lighting

Internal Area Approx 3000mm x 3000mm x 2400mm High. Normal Temp 100 deg c. Max Temp 220 deg c. Hours Run 02351.

Radius Approx 3M

Internal Area Approx 1700mm x 1750mm x 950mm High.

Internal Area Approx 1500mm x 900mm

Working Area 1300mm x 750mm x 900mm High

Working Area 1300mm x 750mm x 900mm High

Size Approx 1800mm x 600mm x 500mm

Radius Approx 2.5M. Concreted into Floor.

All Hand Feed. Spindle Nose Three off No 2 Morse Taper & One off No 3 Morse Taper

Table Size 1828mm x 355mm (72" x 14") Spindle Nose 50 Int with 2 off Arbor Supports

Table Size 952mm x 235mm Spindle Nose 30 Int with Arbor Support

Centre Height Approx 150mm. Table Stroke Appros 450mm

Throat 290mm. Table Size 405mm x 405mm

With Power Feed, Spindle No 3 Morse Taper.

Hand Feed. Spindle No 2 Morse Taper

Capacity 13mm (1/2") Table 610mm x 393mm. Throat 190mm.

With 50 Int Taper, 2 Axis DRO & Printer

With TM-351E Wire Feed & Tweco Cooler

With TM-501W Wire Feed & Tweco Cooler

With Tweco Cooler

With Built in Wire Feed

Single Phase

With 55 & 80 Volt Tappings

Max Temp 300 deg c. Single Phase

Single Phase

Capacity 610mm (24" x 18g)

Capacity Length 1000mm. Roll Dia 50mm

Capacity Length 635mm. Roll Dia 32mm

Capacity Length 736mm. Roll Dia 50mm

Max Stroke 150mm. 43-380 SPM.

Swing over Bed 410mm Dia x 800mm B.C.

Table 1400mm x 265mm. Power Feeds. Spindle Nose 40 Int

Consisting of Accustic Panels & Roof. Front is Approx 13M Long x 2335mm High, Includes 3 Pairs of Doors Plus Three 4M Dividing Internal Partitions.

Pendant Operated 5,000kg Electric Hoist. Span Approx 13M. Does Not Include Crane Rails or Supports

Radius Approx 4.2M x 3M High

Radius Approx 3M x 3.6M High

Radius Approx 2.8M x 3M High

Radius Approx 2.8M x 2.8M High

Radius Approx 3M x 3M High

Radius Approx 3.8M x 3.80M High. With Power Traverse.

See Photo of Plate for More Deatails. Used as Drive Motor for Testing Compressors

Consisting of Accustic Panels & Roof. Front is Approx 4M Long x 2335mm High, Includes Pair of Doors Plus 4M Side Panel.

Radius Approx 2M x 3.35M High

Radius Approx 2M x 3.35M High

Radius Approx 1.7M x 2.9M High

With Approx 3.5M Traversing Beam (Travelling) & Pendant

With Approx 3.6M Traversing Beam (Travelling) & Pendant

With Approx 4.2M Traversing Beam (Travelling) & Pendant

With Approx 3.5M Traversing Beam (Travelling) & Pendant

With Approx 3.4M Traversing Beam (Travelling) & Pendant

With Approx 3.8M Traversing Beam (Travelling) & Pendant

With Approx 3.6M Traversing Beam (Fixed) & Pendant

Radius Approx 3M x 3M High

Milling Head Spindle Nose - R8

Cutter Dia - 2 off 120mm & 180mm. Plus 2 off 50 Int Tapers

Used with Lots 3 & 4

Centre Height Approx 135mm.

Centre Height Approx 125mm.

Centre Height Approx 135mm. With Collets.

Size Approx 220mm x 100mm

Size Approx 315mm x 120mm

Size Approx 315mm x 120mm

Size Approx 255mm x 125mm

Size Approx 255mm x 125mm

Size Approx 150mm Diameter

Single Phase

Sizes Approx 1 off 200mm & 2 off 190mm Diameter

Sizes Approx 190mm, 160mm & 150mm Diameter

Size Approx 680mm x 530mm x 530 High